Blow Mold
Blow molding or blow forming, is a manufacturing process by which hollow plastic parts are formed. It is a process used to produce hollow objects from thermoplastic. | Injection Mold
Injection molding is a manufacturing process for producing parts from both thermoplastic and thermosetting plastic materials. |
Reaction Injection Molding
RIM (Reaction injection molding) molding is similar to injection molding except thermosetting polymers are used, which requires a curing reaction to occur within the mold. | Rotational Mold
Rotational molding also known as rotomolding, is a molding process for creating many kinds of mostly hollow items, typically of plastic. Rotational molding is a versatile process for creating a variety hollow plastic parts. This process uses heat and biaxial rotation, rotation on two axes, to produce hollow, one piece parts. |
Stack Mold
Stack Mold are the two mold parting surfaces or mold split lines. A stack mold does not require much more clamp force than a single phase mold because the projected part surface areas of the cavities on both sides of the center block cancel out each others force. | Thermoform Mold
Thermoform Mold also known as Thermoforming is a manufacturing process where a plastic sheet is heated to a pliable forming temperature, formed to a specific shape in a mold and trimmed to create a usable product. |
Transfer Mold
Transfer Mold is a process where the amount of molding material is measured and inserted before the molding takes place. | |
