Brake Bending
Brake Bending or bending brake is an metalworking machine that allows the bending of sheet metal.
| Deep Drawing
Deep drawing is a sheet metal forming process in which a sheet metal blank is radially drawn into a forming die by the mechanical action of a punch. |
Enclosures
Enclosures are protective housings for electronics, equipment batteries or other applications. They are designed to protect personnel from accidental injury and to prevent the ingress of environmental contaminants.
| Extrusions
Extrusion is a process used to create objects of a fixed cross-sectional profile. This process can be done with the material hot or cold. |
General Sheet Metal Work
General sheet metal work is simply metal formed into thin and flat pieces. It is one of the fundamental forms used in metalworking and can be cut and bent into a variety of different shapes. | Hydroforming
Hydroforming is a cost-effective way of shaping malleable metals into lightweight, structurally stiff and strong pieces. It is highly used in automotive industry. |
Metal Cutting (Gas, Laser, Plasma, Waterjet)
Metal Cutting is a manufacturing process used to separate materials. Laser Metal Cutting is often used in industrial manufacturing areas for cutting sheet metal and piping. | Metal Spinning
Metal Spinning is a metalworking process by which a disc or tube of metal is rotated at high speed and formed into an axially symmetric part. |
Precision CNC Sheet Metal
Precision CNC Sheet Metal is an metal formed into thin and flat pieces which are used in the applications of building car bodies, airplane wings, medical tables and etc. | Presswork
Presswork or industrial presses use a ram to shear, punch, form or assemble metals or other materials by cutting, shaping or using dies attached to slides.
|
Punching
Punching is a metalworking process of using a punch press to push a punch through the material and into a die to create a hole in the workpiece. | Roll Forming
Roll Forming is a continuous bending operation in which a long strip of metal is passed through consecutive sets of rolls, or stands, each performing only an incremental part of the bend, until the desired cross-section profile is obtained. |
Shearing
Shearing is a metalworking process which cuts stock without the formation of chips or the use of burning or melting. It is also known as die cutting. | Custom Metal Gaskets
Custom metal gaskets are a mechanical seal that fills the space between two mating surfaces, generally to prevent leakage from or into the joined objects while under compression. |
Springs & Wireforms
Springs and wireforms are mechanical devices, commonly made from tensioned steel, used to exert pressure or tension, resist tension, or retract after tension is applied. | Stamping
Stamping is the manufacturing process whereby a metal stamping die or a set of metal stamping dies is used to form sheet metal blanks into a three dimensional shape. |
Tube/Wire Bending
Tube or Wire Bending is a metalworking process used to permanently form stock tubing in to the shape of a die. | Welding
Welding is a fabrication or sculptural process that joins materials, usually metals or thermoplastics, by causing coalescence. |
Wire Forming
Wire Forming process is performed with a variety of techniques depending on the wire diameter. It is used into fabricating shapes such as clips, springs, specialty pins, rings, wire racks, hooks and etc. | |
